What should I do if the stone engraving machine is not controlled?

    If you have used a stone engraving machine, you will find that sometimes when using this kind of machine, you will find that the knife and the machine tool cannot be controlled, as if it is disordered. In this case, what should I do? Many people think that the machine is in a difficult situation to repair, or that there is a problem in questioning the quality of the machine. In fact, it is not entirely the reason. If you find such a usage problem, follow the steps below.
    First, stop the machine immediately. This is a must. Once the disorder is found, stop the machine and turn off the power. Because if it is confusing, it will destroy the engraving and typesetting of this time, and the subsequent engraving can no longer be carried out.
    Then check the machine's knives and the gaps in the machine. When the stone engraving machine manufacturers are inspecting, they will find that many engraving machines are inaccurate or even confusing because they have stuck in the cracks or shafts, which makes the machine unable to operate normally. If this is the case, the stuck place is cleaned up, everything is restored to its original position, and there is no problem when it is used again.
    If this is not the case, check if the screws in the area such as the shaft are loose, or if the connection between the engraving machine and the computer is loose. This is the case with the engraving machine. When these are excluded, if you still can't find the reason, you should call the manufacturer for repair.

Stone carving machine operation should pay attention to matters

    Stone engraving machines are often used in today's stone processing industry and represent the main equipment in the industry today. With the progress and development of the industry, the efficiency of the industry has been greatly improved. What are the main items that need to be considered when operating the engraving machine?
    The operation of the stone engraving machine requires a comprehensive understanding of the program. According to different stone carvings and different styles of engraving, the compilation of the engraving program is very different. When using the engraving machine, you must first have a comprehensive understanding of the engraving project, and compile the engraving program according to the actual situation, so as to ensure the correct operation of the equipment and reduce the existence of errors. At the same time, in the programming, it is necessary to ensure that the processing requirements are met, so as to avoid problems in the later stage and affect the entire engraving work.
    The stone engraving machine manufacturer pointed out that in addition to the procedural attention when using the engraving machine, it is also necessary to consider a maintenance work of the equipment itself. After all, in the long-term use, it will inevitably be affected by dust and other infections, which will affect the use efficiency of the equipment. After long-term use, it should be cleaned in time to avoid the phenomenon of card machine.
Basically, this is the main thing to consider when operating the engraving machine. Pay attention to the operation and better protect the use of the equipment.