Advertising engraving machine tool selection and operation method?

1. Advertising engraving machine tool selection:

(1) If it is a high-density board or solid wood processing, it is recommended to use a tooth milling cutter.

(2) If it is a multi-layer board or plywood processing, it is recommended to use a double-edged straight groove milling cutter.

(3) If it is acrylic mirror engraving, it is recommended to use a diamond engraving knife.

(4) If it is roughing particleboard processing, it is recommended to use multi-strip milling cutter.

(5) If it is cork, MDF, virgin wood, PVC board, acrylic large deep relief processing, it is recommended to use single-blade spiral ball end milling cutter.

(6) If it is aluminum sheet cutting, it is recommended to use a single-blade special aluminum milling cutter. Because the single-blade special aluminum milling cutter does not stick to the knife during processing, it is fast and efficient.

(7) If it is a precision small relief processing, it is recommended to use a round bottom knife.

(8) For the upper and lower burr-free cutting process, it is recommended to use a single-edged, double-edged upper and lower cutting cutter. The effect of the lower cutter is that there is no burr on the upper surface of the processed product, and it will not be rolled during processing.

(9) If it is MDF cutting, it is recommended to use double-cutter large chip spiral milling cutter. It has two high-capacity chip flutes and double-edged design. It has good chip removal function and achieves good performance. The tool balance is very popular when it is used to process high-density boards without blackening, hatching, and long service life.

(10) For acrylic cutting, a single-edged spiral milling cutter is recommended. The single-blade spiral milling cutter features: smokeless, odorless, fast, high-efficiency, non-sticky, and truly environmentally friendly. Its special manufacturing process ensures that the processing acrylic does not burst, and the fine knife pattern (even without knife) ), the surface is smooth and flat. If the machined surface needs to achieve a matte finish, a double-blade spiral cutter is recommended.

2, advertising engraving machine operation method:

(1) Calculate the path file in the engraving software;

(2) generate a G code object file;

(3) Download the file into the DSP operation handle;

(4) Engraving on the engraving machine.

A, please first power on the interface board

B. Connect the handheld controller and interface with the data cable.

C. Power on the interface board again to perform the following operations.

Set the machine pulse equivalent.

Set the operating range of the machine's three axes.

Set the machine zero setting.

Set the machine's three-axis speed and grid.

Set the direction of the machine's three-axis motor.

[X+] Forward movement of the X-axis of the cylindrical engraving machine

[Y+] Forward movement of Y axis, selection of upshift of menu, increase of digital loop input, adjustment of machining magnification, selection of different option attributes in menu

[Z+]Z-axis forward movement, increase spindle speed during machining

[XY→0] sets the working origin of the X and Y axes

[X-] X-axis negative movement, digital input bit number cycle selection

[Y-] Negative movement of Y-axis, selection of downshift of menu, reduction of digital loop input, adjustment of machining magnification, selection of different option attributes in menu

[Z-]Cylinder engraving machine Z-axis negative movement, digital input digits cycle selection, reduce spindle speed during machining

[Z→0] Set the working origin of the Z axis

[Menu] Menu setting, manual machining, automatic machining, advanced machining function switching

[Axis start/axis stop] Start or stop of the spindle in the manual state

[High speed / low speed] manual state high speed / low speed movement selection

[Zero return] Each axis returns to the machine origin in the manual state

[Stop/Cancel] Enter the setting of manual high and low speed parameters, terminate processing during processing and cancel various selections, inputs, operations

[Manual mode] Manual movement, continuous, stepping, distance selection

[Run/Pause] Run automatic machining and pause machining and tool setting

[OK OK] Each axis returns to the working origin position and various selection, input, and operation determination.