Engraving machine safety matters

   Engraving machine safety matters:

     1: When installing the flexible shaft or replacing the grinding head, be sure to unplug the power cord!
     2: The chuck of the soft shaft and the fuselage, the chuck of the soft shaft and the grinding head must be locked with a small wrench.
     3: When the engraving machine is powered on, the power switch must be in the OFF state.
     4: Before processing, in addition to fixing the workpiece to be fixed, the engraving machine should be tested (no-load), and the machining operation can be performed after confirming that there is no abnormality.
     5: Before using the machine, carefully check the grinding head used. It is strictly forbidden to use the damaged or cracked grinding head.
     6: Wear protective goggles when using the tool.
     7: When machining parts. The pressure exerted by the hand on the engraving machine should be properly controlled, and the excessive force should not be used.
     8: When using the cutting piece, it is necessary to ensure that the person deviates from the tangential direction of the cutting piece to prevent the cutting piece from injuring people.