Woodworking engraving machine is one of the more commonly used engraving machines. It is widely used in wood carving. The following small series introduces the positioning of wood engraving machine for you briefly.
Positioning must first be from the fixed beginning of the data. The fixation here is not to say that the data is fastened with the splint, and the information is still correct. Use our carpenter carving machine to accurately align the data, install a straight knife on the spindle, then drop the tool onto the table, run along the side of the data, use a side of the data and a direct gap between the tools Come to find the information. Correct the data in the future. Then proceed to the next job to determine the workpiece origin of the data.
The determination of the X direction and the Y direction is the same method. Here we only say the X direction. First fine-tune the tool slowly to the left side of the data, and slowly roll the tool by hand until the tool just touches the data, then clear the left side of the X workpiece, and then lift the tool to the right. The same is to just touch the tool to the right side of the data, note the X workpiece coordinates at the moment. Then the general orientation of this value is the center of the data X direction. The Y direction is also the same. In this way, the center of the X and Y directions of the carpenter carving machine is determined, which is equivalent to the origin of the workpiece.
The selection of wooden doors is mainly solid wood, especially solid wood composite materials, which preserves the advantages of natural wood and avoids the disadvantages of easy deformation and cracking. The selection of materials is of course important, but in the manufacturing process, sophisticated. Traditional craft manufacturing processes have gradually been replaced by mechanical manufacturing. Carpenter carving machine has become the new favorite of wooden door manufacturing and has been favored by more and more wooden door manufacturers. First and foremost, as mechanized equipment, it is more efficient than manual manufacturing, and the scrap rate is extremely low. The carpenter carving machine uses a gantry-type structure and a bed of heavy-duty steel structure to ensure the overall stability of the machine. The rack drive makes the transmission smooth, ensuring long-term high-speed operation without deformation and no vibration. In this way, when the precision wooden door is carved, the accuracy and beauty of the carving can be ensured, and then the efficiency of the wooden door manufacturing is greatly improved.
The traditional craft wooden door system has to do many times according to the artificial practice elements, the output value is low, and the cost is high. Now we use the wooden door produced by the carpenter carving machine. The carved picture is more exquisite and suitable for batch production.
With the rapid development of the real estate industry, the demand for high-grade wooden doors has gradually emerged. The use of carpenter carving machine has a good effect on solving this problem. Choosing a good carpenter carving machine is not only satisfactory in terms of use, but also in the manufacturing process of the product. The carpenter carving machine developed by Chengdu Kexing according to the needs of the market is the best choice for all kinds of wooden door carving and milling. The machine has been in the market for two years and has been well received by consumers.
